The term “EV charging station”, as defined by IEC 61851-1, is the stationary part of the EV supply equipment that is connected to the supply network. It can be either wall-mounted or floor standing, AC or DC. It is dedicated equipment for charging EVs through Mode 3 (AC) and Mode 4 (DC).
Charging station can be installed indoors or outdoors.
As a general rule, IP protection is at least IP54 for outdoor usage even if IEC 61851-1 recommends only IP44. Shock IK protection is generally IK10. To be IEC 61851-1 compliant, the charger must be able to operate up to 2000 meters altitude and to a minimum temperature of at least -25°C in outdoor environments and -5°C for indoor environments.
In practice, charging station can usually operate within a range of -30°C to +50°C and within a relative humidity range of 5% to 95%.
Your first commercial EV charging station starts here!
With the rapid growth of global EV market, the demand of EV charging stations is on the rise. Building a site of public EV charging from scratch requires comprehensive planning and careful evaluation of charging infrastructrue solutions.
MIDA provides you with a variety of photovoltaic-storage-charging integrated power solutions consisting of consulting and designing, construction and installation, system commissioning, operation and maintenance, as well as a one-stop supply of hardware and software products.
With MIDA’s hardware, software and engineering services，you can rapidly deploy a smart, eco-friendly charging station. Here what we can offer you:
EVC supply
We supply the best value electric vehicle charging accessories from reliable partners to ensure safe and smooth charging experience.
EVC Assemble
We offer on-line meeting services to support you with instructions of assembling
Maintenance Service
Support doesn’t end at assembling. We provide after-sales services to help your EVC system run with maximum up time and in good conditions.