With the mass production of new energy vehicles, charging piles are also trying to keep pace with The Times in the direction of 2:1 pile ratio. We need to know that many charging stations need a large number of charging piles. Generally, how do we apply for new energy vehicle charging piles? What are the procedures, you can refer to the information from the Internet.

1. The conditions for applying for installation, parking space or rental parking space of new energy vehicle charging piles: the application materials have written proof that the property management unit of the parking lot agrees to install the charging pile, and the new seal of the property management unit is affixed; Parking space ownership certificate or lease contract; Id of the owner or tenant of the parking space. Note: No proof of purchase is required. Go to the district power supply bureau where the parking space is located, such as high-tech power supply Bureau, Shuangliu District power supply Bureau.) 

2. The applicant goes to the business hall of the power supply branch, lines up according to the number, submits three materials prepared in advance to the counter manager of the power supply Bureau, and the property agrees to install the charging pile certificate, parking space certificate and ID card. Fill in the form, pay attention to the application intensity, please fill in the corresponding power charging pile. 

3. The applicant should prepare an Android phone, and install the APP handheld power supply (official version) if it is better and faster. The method is to scan its QR code and install the APP. Run the APP and upload the applicant's ID photo, parking address and contact phone number as required. You can check the bidding progress through the APP, you can also use the APP to check the meter and recharge. The technology will tell you when the application process is complete. Within 3 working days, the technical staff of the power supply Bureau will come to your parking space to check whether the charging pile can be installed and decide on the installation location. 

4. The power supply Bureau technicians will contact the applicant by phone to make an appointment to install the meter. The applicant must make an appointment with the property management electrician and cooperate with the staff of the Power Supply Board. The meter can be set up in 20 minutes. All you have to do is watch. Electricity meters are provided free of charge. After the installation has been received 50 yuan in advance, immediately available. The power supply officer will give you the subscriber number and a 10-digit string. Remember, it's best to take a picture of his to-do list with your phone. This number is the ID number of the meter. 

5. After three or five days, you can go to the metering class of the power supply Bureau to get the electricity card with the user number and ID card, which is the recharge card. For free! After receiving the card, go to the business hall to charge some money of more than 100 yuan, and then go home to insert the card into the meter to recharge. Test whether the card and meter are working properly. At this point, the charging pile installation is basically over.